Traditional Chinese
English
PROVA 133
Source 4~20 mA loop Current. Simulate 4~20 mA transmitter. Simulate electronic load (Max. 30V, 20mA). Test LED brightness (0~24mA). Source 0~70mV and 0~15V. Calibrate temperature with selection of 11 types of thermocouples. Source frequency (0.3 to 20KHz) of many waveforms. Source: mA, V, Hz, sine wave, square wave, triangular wave, truncated sine wave, user programmable waveform and temperature. Generate arbitrary waveform. Generate single pulse (3μS to 999.99mS). Map 4~20 mA into engineering units. Measure: Current (mA), Voltage (mV, V), and temperature (°C, °F). Measure 4~20 mA with 24V loop supply simultaneously. Selectable 250Ω HART resistor to facilitate use with HART communication device. Programmable cold junction compensation for temperature measurement. Auto step and auto ramp for sourcing mA, V, and temperature. Dot matrix LCD with backlight. Rechargeable lithium battery (1600mAh). Data logging function for source and measurement. Program calibrator through PC USB port. Programmable 0% and 100% value for easy 25% step function. DTMF (Dual Tone Multi-Frequency) can perform professional testing for telephone line and audio product (MP3 or MD).
Documenting Multifunction Calibrator
Availability: In stock
- Specification
- Application
Electrical Specifications:
(23+/- 5℃, 10 minutes after turning on the power)
mA (source) (Vopen > 24V)
|
Range |
Resolution |
Accuracy of Reading |
|
0.005mA to 4mA |
1uA
|
+/-0.03% +/-5dgts |
|
4mA to 20mA |
+/-0.03% +/-3dgts |
|
|
20mA to 24mA |
+/-0.03% +/-5dgts |
V (source) (maximum load 1mA, short circuit protection < 100mA)
|
Range |
Resolution |
Accuracy of Reading |
|
0.005V to 10V |
0.001V |
+/-0.03% +/-5dgts |
|
10V to 15V |
mA (measure)
|
Range |
Resolution |
Accuracy of Reading |
|
-4mA to -0.005mA |
1uA
|
+/-0.03% +/-10dgts |
|
0.005mA to 4mA |
+/-0.03% +/-5dgts |
|
|
4mA to 20mA |
+/-0.03% +/-3dgts |
|
|
20mA to 24mA |
+/-0.03% +/-5dgts |
If reading of mA (measure) is less than 5 digits, it is displayed as 0.
V (measure)
|
Range |
Resolution |
Accuracy of Reading |
|
-3V to -0.005V |
0.001V
|
+/-0.03% +/-10dgts |
|
0.005V to 10V |
+/-0.03% +/-5dgts |
|
|
10V to 24V |
+/-0.03% +/-5dgts |
If reading of V (measure) is less than 5 digits, it is displayed as 0.
Frequency (source, 10 Vpp, 0V offset, square wave, duty cycle = 50%)
|
Range (Hz) |
Input Resolution |
Accuracy |
|
0.3 to 99.999 |
0.1Hz |
0.002Hz |
|
10.00 to 999.99 |
0.1Hz |
0.02Hz |
|
1000.0 to 9999.9 |
0.1Hz |
0.2Hz |
|
10000 to 20000 |
1Hz |
2Hz |
Voltage Peak to Peak for Sine Wave
(Vpp, 0.3~20KHz, 50% duty cycle, sine wave, 0V offset)
|
Range (V) |
Resolution |
Accuracy of Reading |
|
0.1 to 20V |
0.001V |
5% +/- 0.3V |
Voltage Peak to Peak for Non-Sine Wave (Vpp, 0.3~20KHz, 0V offset)
|
Range (V) |
Resolution |
Accuracy of Reading |
|
0.1 to 20V |
0.001V |
6% +/- 0.4V |
Voltage Peak to Peak (Vpp, 0.3~20KHz, 50% duty cycle, square wave, 0V offset)
|
Range (V) |
Resolution |
Accuracy of Reading |
|
1 to 20V |
0.001V |
6% +/- 0.4V |
Voltage of Offset (Maximum Vpp < 20V)
|
Range |
Resolution |
Accuracy of Reading |
|
-5V to 5V |
0.001V |
5% +/-0.5V +/-5%xVpp |
Temperature, Thermocouples
(source and measure, 0.1C & 0.1F Resolution, Internal Cold Junction Compensation, thermocouple accuracy not included, 3 minutes after plugging in thermocouples.)
|
|
°C |
°F |
||
|
Range |
Accuracy |
Range |
Accuracy |
|
|
K |
-200 to -150 |
2.0 |
-382 to -238 |
3.6 |
|
-150 to 0 |
1.2 |
-238 to 32 |
2.1 |
|
|
0 to 1000 |
0.8 |
32 to 1832 |
1.4 |
|
|
1000 to 1370 |
1.2 |
1832 to 2498 |
2.1 |
|
|
J |
-200 to -150 |
2.0 |
-382 to -238 |
3.6 |
|
-150 to 0 |
1.0 |
-238 to 32 |
1.8 |
|
|
0 to 1050 |
0.7 |
32 to 1922 |
1.2 |
|
|
E |
-200 to -150 |
1.5 |
-382 to -238 |
2.7 |
|
-150 to 0 |
0.9 |
-238 to 32 |
1.6 |
|
|
0 to 850 |
0.7 |
32 to 1562 |
1.2 |
|
|
T |
-200 to -150 |
1.5 |
-382 to -238 |
2.7 |
|
-150 to 0 |
1.2 |
-238 to 32 |
2.1 |
|
|
0 to 400 |
0.8 |
32 to 752 |
1.4 |
|
|
R |
0 to 500 |
1.8 |
32 to 932 |
3.2 |
|
500 to 1760 |
1.5 |
932 to 3200 |
2.7 |
|
|
S |
0 to 500 |
1.8 |
32 to 932 |
3.2 |
|
500 to 1760 |
1.5 |
932 to 3200 |
2.7 |
|
|
N |
-200 to 0 |
1.5 |
-328 to 32 |
2.7 |
|
0 to 1300 |
0.9 |
32 to 2372 |
1.6 |
|
|
L |
-200 to 0 |
0.9 |
-328 to 32 |
1.6 |
|
0 to 900 |
0.7 |
32 to 1652 |
1.2 |
|
|
U |
-200 to 0 |
1.1 |
-328 to 32 |
1.9 |
|
0 to 600 |
0.7 |
32 to 1112 |
1.2 |
|
|
B |
600 to 800 |
2.2 |
1112 to 1472 |
3.9 |
|
800 to 1000 |
1.8 |
1472 to 1832 |
3.2 |
|
|
1000 to 1820 |
1.4 |
1832 to 3308 |
2.5 |
|
|
C |
0 to 1800 |
1.0 |
32 to 3272 |
1.8 |
|
1800 to 2310 |
1.5 |
3272 to 4190 |
2.7 |
|
|
mV |
-10mV to 70mV |
0.05mV |
-10mV to 70mV |
0.05mV |
Duty Cycle (%, square wave, 10 Vpp, 0.3~20KHz)
|
Range |
Resolution |
Rise Time of Vpp |
Fall Time of Vpp |
|
0 to 100% |
1% |
10μS max, 5μS typical |
15μS max, 7.5μS typical |
Pulse (square wave, 10 Vpp, Offset -5V~+5V)
|
Range |
Resolution |
Rise Time of Vpp |
Fall Time of Vpp |
|
3.0μS to 9999.9μS |
0.1μS |
10μS max, 5μS typical |
15μS max, 7.5μS typical |
|
10.000mS to 99.999mS |
0.001mS |
||
|
100.00mS to 999.99mS |
0.01mS |
DTMF (Hz)
|
Range (Hz) |
Resolution |
Accuracy of Reading |
|
0.3 to 99.999 |
0.1Hz |
0.002Hz |
|
10.00 to 999.99 |
0.1Hz |
0.02Hz |
|
1000.0 to 9999.9 |
0.1Hz |
0.2Hz |
|
10000 to 20000 |
1Hz |
2Hz |
DTMF (%)
|
Range (%) |
Resolution |
Accuracy of Reading |
|
0% ~ 100% |
1% |
5% |
DTMF (Phase Angle)
|
Range (°) |
Resolution |
Accuracy of Reading |
|
0 ~ 360 |
1° |
100μS+1° |
DTMF (Vpp, F1=F2,
|
Range |
Resolution |
Accuracy of Reading |
|
5V ~ 20V |
0.001V |
10% +/-0.6V |
DTMF (Offset, F1=F2,
|
Range |
Resolution |
Accuracy of Reading |
|
-5V ~ 5V |
0.001V |
10% +/-0.6V +/-5%xVpp |
General Specifications:
|
AC Power Adaptor: |
AC 110V or AC 220V, 50/60Hz input. DC 15V / 0.5A output |
|
Dimension: |
214.0 (L) x 98.7 (W) x 56.0 (H) mm 8.4" (L) x 3.9" (W) x 2.2" (H) |
|
Weight: |
650g / 22.9oz (Batteries included) |
|
Operation Environment: |
0℃ ~ 50℃, 85% RH |
|
Storage Environment: |
-20℃ ~ 60℃, 75% RH |
|
Accessories: |
Carrying case x 1, User manual x 1, AC power adaptor x 1, USB cable x 1, Software CD x 1, Software manual x 1, K-type thermocouple (dual plugs) x 1, Alligator clips x 2 (black and red), Test leads x 2 (black and red), Rechargeable lithium battery (11.1V/ 1600mAh) x 1 |
Related Products
‧ Source 4~20mA loop current.
‧ 4~20mA (1KΩ load, 24V loop supply).
‧ Source: 0~100mV, 0~1.000V, 0~12.000V.
‧ Measure: DC mA, mV, V, Ω, Frequency (duty cycle), Diode, Continuity and temperature (°C, °F).
‧ Measure: AC (True RMS) mA, mV, V.
‧ Calibrate/Measure temperature of 11 types of thermocouples (K, J, E, T, R, S, N, L, U, B and C).
‧ 0.1*C & 0.1*F Resolution.
‧ Detection of thermocouples disconnection.
‧ Source frequency (1 to 20000Hz).
‧ Programmable duty cycle (0~100%) of frequency output.
‧ Source and Measure Simultaneously.
‧ Selectable HART 250Ω resistor to facilitate use with HART communication device.
‧ Auto step and auto ramp for sourcing mA, V and temperature.
‧ 25% ▲, 25% ▼, or programmable percentage (0~100%) increase and decrease.
‧ Warning for overload, output open (mA) or short (mV, V).
‧ Short circuit protection for voltage output.
‧ Battery power indication (%).
‧ Clear and easy user interface.
‧ 4~20mA (1KΩ load, 24V loop supply).
‧ Source: 0~100mV, 0~1.000V, 0~12.000V.
‧ Measure: DC mA, mV, V, Ω, Frequency (duty cycle), Diode, Continuity and temperature (°C, °F).
‧ Measure: AC (True RMS) mA, mV, V.
‧ Calibrate/Measure temperature of 11 types of thermocouples (K, J, E, T, R, S, N, L, U, B and C).
‧ 0.1*C & 0.1*F Resolution.
‧ Detection of thermocouples disconnection.
‧ Source frequency (1 to 20000Hz).
‧ Programmable duty cycle (0~100%) of frequency output.
‧ Source and Measure Simultaneously.
‧ Selectable HART 250Ω resistor to facilitate use with HART communication device.
‧ Auto step and auto ramp for sourcing mA, V and temperature.
‧ 25% ▲, 25% ▼, or programmable percentage (0~100%) increase and decrease.
‧ Warning for overload, output open (mA) or short (mV, V).
‧ Short circuit protection for voltage output.
‧ Battery power indication (%).
‧ Clear and easy user interface.
- US$ 760
- Log in for sale price
‧4-20mA, with 1 μ A resolution.
‧Basic Accuracy 0.025% + 5 μ A.
‧Auto-Ramp and Easy Step Functions.
‧1-100% Input.
‧0-20mA, 0-24mA Selectable.
‧Easy Just-Type-in Number Operation.
‧Basic Accuracy 0.025% + 5 μ A.
‧Auto-Ramp and Easy Step Functions.
‧1-100% Input.
‧0-20mA, 0-24mA Selectable.
‧Easy Just-Type-in Number Operation.
- US$ 248
- Log in for sale price
‧4-20mA, 0-20mA, 0-24mA with 1 m A resolution.
‧0-100mV with 10 m V resolution.
‧0-12V with 1mV resolution.
‧Thermocouple K,J,E,T TYPE 1 o C 1 o F resolution.
‧Frequency 2 - 50,000Hz.
‧0-100mV with 10 m V resolution.
‧0-12V with 1mV resolution.
‧Thermocouple K,J,E,T TYPE 1 o C 1 o F resolution.
‧Frequency 2 - 50,000Hz.
- US$ 413
- Log in for sale price
‧Unique mapping function let you calibrate temperature (300 °C) or voltage (220V) directly.
‧iCal is a multifunction calibrator and an arbitrary function generator.
‧Source: mA (4 to 20mA), V (0 to 15V, 0 to 70mV), Hz, sine wave, square wave, triangular wave, truncated sine wave, user rogrammable waveform and temperature for 11 types of thermocouples.
‧Measure: current (mA), voltage (V, mV) and temperature (℃ or °F).
‧Programmable cold junction compensation allows users to fine tune temperature output and measurement.
‧Programmable 0% and 100% value for easy 25% step function.
‧Output error warning when output is shorted or open.
‧Short circuit protection for voltage output.
‧Clear and easy user interface (numerical key pad, sliding switch and dot matrix LCM with backlight).
‧Voltage, frequency, PWM duty-cycle (square wave and triangular wave), and offset are programmable in the Hz function.
‧Frequency range (0.3Hz to 20KHz) covers application of audio band (speaker, MP3, MD etc.).
‧DTMF (Dual Tone Multi-Frequency) can perform professional testing for telephone line and audio product (MP3 or MD).
‧Auto-step and auto-ramp functions can quickly perform linear test.
‧PC can program calibrator through USB port.
‧Data logging with programmable sampling time (0~255 sec.) and memory of 4000 records.
‧Rechargeable lithium battery (1600mAH) with built-in charging circuit.
‧Calibration results (source & measure) can be saved in memory (2000 records). Then users download them to a PC for documentation.
‧To distinguish calibration data at different locations, data can be saved under different file names.
‧iCal is a multifunction calibrator and an arbitrary function generator.
‧Source: mA (4 to 20mA), V (0 to 15V, 0 to 70mV), Hz, sine wave, square wave, triangular wave, truncated sine wave, user rogrammable waveform and temperature for 11 types of thermocouples.
‧Measure: current (mA), voltage (V, mV) and temperature (℃ or °F).
‧Programmable cold junction compensation allows users to fine tune temperature output and measurement.
‧Programmable 0% and 100% value for easy 25% step function.
‧Output error warning when output is shorted or open.
‧Short circuit protection for voltage output.
‧Clear and easy user interface (numerical key pad, sliding switch and dot matrix LCM with backlight).
‧Voltage, frequency, PWM duty-cycle (square wave and triangular wave), and offset are programmable in the Hz function.
‧Frequency range (0.3Hz to 20KHz) covers application of audio band (speaker, MP3, MD etc.).
‧DTMF (Dual Tone Multi-Frequency) can perform professional testing for telephone line and audio product (MP3 or MD).
‧Auto-step and auto-ramp functions can quickly perform linear test.
‧PC can program calibrator through USB port.
‧Data logging with programmable sampling time (0~255 sec.) and memory of 4000 records.
‧Rechargeable lithium battery (1600mAH) with built-in charging circuit.
‧Calibration results (source & measure) can be saved in memory (2000 records). Then users download them to a PC for documentation.
‧To distinguish calibration data at different locations, data can be saved under different file names.
- US$ 935
- Log in for sale price
