Traditional Chinese
English
TES-3040
3-3/4 Digital LCD with bar-graph. Auto-Ranging on Volt, Ohm, Current, Frequency measurements. Auto-power off. Data Hold mode. MAX/MIN Hold mode. Zero/Adjustment/Relative Reading.
AC Clamp Meter
Availability: In stock
- Specification
- Application
DC Voltage（Autorange ＆ Manual）
|
Range |
Resolution |
Accuracy |
Input Impedance |
Overload protection |
|
400mV |
0.1 mV |
±(0.75%rdg+2dgts) |
≧1000MΩ |
660Vrms |
|
4V |
0.001V |
≒ 11MΩ |
||
|
40V |
0.01V |
≒ 10MΩ |
||
|
400V |
0.1V |
|||
|
600V |
1V |
AC Voltage（Autorange ＆ Manual）
|
Range |
Resolution |
Accuracy |
Input impedance |
Overload protection |
Frequency Response |
|
4V |
0.001V |
±(1.2%rdg +5dgts) |
≒ 11MΩ |
660Vrms |
40～450Hz |
|
40V |
0.01V |
≒ 10MΩ |
|||
|
400V |
0.1V |
||||
|
600V |
1V |
±( 1.5%rdg |
AC Current（Autoange ＆ Manual）
|
Range |
Resolution |
Accuracy |
Overload protection |
Frequency Response |
|
400A |
0.1A |
±( 2%rdg + 10 dgts ) |
1100A |
40～450 Hz |
|
1000A |
1 A |
Frequency ( Hz )（Autorange only for current）
|
Range |
Resolution |
Accuracy |
Sensitivity |
Overload protection |
|
100 Hz |
0.01 Hz |
±( 0.5%rdg+5dgts) |
5A |
1100A |
|
1KHz |
0.1 Hz |
Frequency ( Hz )（Autorange only for voltage）
|
Range |
Resolution |
Accuracy |
Sensitivity |
Overload protection |
|
100 Hz |
0.01 Hz |
±( 0.1%rdg+2dgts) |
100mV |
660Vrms |
|
1KHz |
0.1 Hz |
|||
|
10KHz |
0.001KHz |
|||
|
100KHz |
0.01 KHz |
|||
|
800KHz |
0.1 KHz |
1V |
Resistance ( Ω )（Autorange ＆ Manual）
|
Range |
Resolution |
Accuracy |
Open circuit Voltage |
Overload protection |
|
400Ω |
0.1Ω |
±( 1%rdg+5dgts) |
≦0.5 VDC |
660Vrms |
|
4KΩ |
0.001KΩ |
±( 1%rdg+3dgts) |
||
|
40KΩ |
0.01 KΩ |
|||
|
400KΩ |
0.1 KΩ |
|||
|
4MΩ |
0.001MΩ |
|||
|
40MΩ |
0.01 MΩ |
±( 1.5%rdg+3dgts) |
Audible Continuity
|
Range |
Continuity beeper |
Open Circuit Voltage |
Overload protection |
|
|
≦40Ω |
≦0.5V |
660Vrms |
Diode test
|
Range |
Resolution |
Accuracy |
Overload protection |
|
|
0.001V |
±( 1%rdg+2dgts ) |
660Vrms |
SPECIFICATIONS
Numerical Display ：3 3/4 digit liquid crystal display (LCD) maximum reading 3999.
Range Selection ：All ranges are selected by a single range switch.
Over Range Indication：LCD will show a "4" flashing in the highest position accompanied with a
continuous beeping. (except for ranges of 1000A AC , and 600VDC 600VAC ).
LowBattery Indication：The 
is displayed when the battery voltage drops below the operating voltage.
Sampling Rate : 20 times/sec ( Barograph ) 2 times/sec (Digital Display)
Power Source ：one 006p 9V or IEC 6F22or NEDA 1604 Battery.
Battery Life ：300hr approx. (Alkaline)
Polarity ：Automatic polarity "–" display for negative input.
Auto power off time ：Approx. 30 minutes.
Operating Temperature：0℃ to 50℃
and Humidity (32℉ to 122℉) below 80%RH
StorageTemperature ：-10℃ to 60℃ and Humidity (14℉ to 140℉) below 70%RH
Dimensions ：239(L)x66(W)x34(H)mm
Weight ：Approx. 430g
Related Products
.jpg)
•Five kinds of Dual display:
Hold + Average
Max + Min
ΔMax + ΔMin
Peak Max + Peak Min
Δ Peak Max + Δ Peak Min
•With backlight.
•Auto Range: V, A, Resistance, Capacitance and Temperature.
•Auto-Power-off function (30 min).
•Ideal for works in crowded switch box or cable areas.
Hold + Average
Max + Min
ΔMax + ΔMin
Peak Max + Peak Min
Δ Peak Max + Δ Peak Min
•With backlight.
•Auto Range: V, A, Resistance, Capacitance and Temperature.
•Auto-Power-off function (30 min).
•Ideal for works in crowded switch box or cable areas.
- US$ 225
- Log in for sale price
.jpg)
•Five kinds of Dual display:
Hold + Average
Max + Min
ΔMax + ΔMin
Peak Max + Peak Min
Δ Peak Max + Δ Peak Min
•With backlight.
•Auto Range: V, A, Resistance, Capacitance and Temperature.
•Auto-Power-off function (30 min).
•Ideal for works in crowded switch box or cable areas.
Hold + Average
Max + Min
ΔMax + ΔMin
Peak Max + Peak Min
Δ Peak Max + Δ Peak Min
•With backlight.
•Auto Range: V, A, Resistance, Capacitance and Temperature.
•Auto-Power-off function (30 min).
•Ideal for works in crowded switch box or cable areas.
- US$ 265
- Log in for sale price
.jpg)
•Capacitance measurement 2000µF.
•Variable-frequency drive VFD voltage & Current measurement.
•ACA: 600A (3013), 1000A (3014).
•Peak / Data Hold.
•Frequency Count / Diode Check.
•Continuity Buzzer.
•Variable-frequency drive VFD voltage & Current measurement.
•ACA: 600A (3013), 1000A (3014).
•Peak / Data Hold.
•Frequency Count / Diode Check.
•Continuity Buzzer.
- US$ 60
- Log in for sale price
‧DC/AC 2000A.
‧Cable f 55mm Bus Bar 72mm(D) x 22mm(W).
‧True RMS (2000).
‧Average Sensing (2003).
‧DCA One Touch Zero.
‧Auto Range A, V, W.
‧Continuity.
‧Max/Min/Hold.
‧Relative Measurement.
‧Cable f 55mm Bus Bar 72mm(D) x 22mm(W).
‧True RMS (2000).
‧Average Sensing (2003).
‧DCA One Touch Zero.
‧Auto Range A, V, W.
‧Continuity.
‧Max/Min/Hold.
‧Relative Measurement.
- US$ 231
- Log in for sale price
.jpg)
•ACA: 20A, 200A, 1000A.
•Peak /Data Hold.
•Frequency Count /Diode Check.
•Continuity Buzzer.
•Low Battery Indication.
•Peak /Data Hold.
•Frequency Count /Diode Check.
•Continuity Buzzer.
•Low Battery Indication.
- US$ 60
- Log in for sale price
‧Variable-frequency drives (VFD) V & Hz measurement.
‧LoZ voltage measurement to drain ghost voltages.
‧Check 3 phase sequence.
‧Motor Inrush current measurement.
‧True RMS reading on AC and DC+AC mode. (3901)
‧uA measurement for HVAC flame sensors. (3901)
‧mV measurement range to interface with other accessories. (3901)
‧Crest Factor & Harmonic ratio measurement. (3901)
‧Data hold, Auto hold & Peak hold mode.
‧Max/Min record mode.
‧Data memory & read function.
‧LoZ voltage measurement to drain ghost voltages.
‧Check 3 phase sequence.
‧Motor Inrush current measurement.
‧True RMS reading on AC and DC+AC mode. (3901)
‧uA measurement for HVAC flame sensors. (3901)
‧mV measurement range to interface with other accessories. (3901)
‧Crest Factor & Harmonic ratio measurement. (3901)
‧Data hold, Auto hold & Peak hold mode.
‧Max/Min record mode.
‧Data memory & read function.
- US$ 94
- Log in for sale price
•Capacitance measurement 2000µF.
•Variable-frequency drive VFD voltage & Current measurement.
•ACA: 600A (3013), 1000A (3014).
•Peak / Data Hold.
•Frequency Count / Diode Check.
•Continuity Buzzer.
•Variable-frequency drive VFD voltage & Current measurement.
•ACA: 600A (3013), 1000A (3014).
•Peak / Data Hold.
•Frequency Count / Diode Check.
•Continuity Buzzer.
- US$ 55
- Log in for sale price
.jpg)
•Capacitance measurement 1000µF.
•Variable-frequency drive (VFD) V & Hz measurement.
•Lo-Z voltage measurement to drain ghost voltages.
•Check 3Φ phase sequence.
•True RMS reading on AC and DC+AC mode.
•Inrush current measurement.
•A measurement for HVAC flame sensors.
•mV measurement range to interface with other accessories.
•Crest Factor & Harmonic ratio measurement.
•Data hold, Auto hold & Peak hold mode.
•Max/Min/Avg record mode.
•Data memory & read function.
•Variable-frequency drive (VFD) V & Hz measurement.
•Lo-Z voltage measurement to drain ghost voltages.
•Check 3Φ phase sequence.
•True RMS reading on AC and DC+AC mode.
•Inrush current measurement.
•A measurement for HVAC flame sensors.
•mV measurement range to interface with other accessories.
•Crest Factor & Harmonic ratio measurement.
•Data hold, Auto hold & Peak hold mode.
•Max/Min/Avg record mode.
•Data memory & read function.
- US$ 127
- Log in for sale price
‧DC/AC 2000A.
‧Cable f 55mm, Bus Bar 72mm(D) x 22mm(W).
‧True RMS (2000).
‧Average Sensing (2003).
‧DCA One Touch Zero.
‧Auto Range A, V, W.
‧Continuity.
‧Max/Min/Hold.
‧Relative Measurement.
‧Cable f 55mm, Bus Bar 72mm(D) x 22mm(W).
‧True RMS (2000).
‧Average Sensing (2003).
‧DCA One Touch Zero.
‧Auto Range A, V, W.
‧Continuity.
‧Max/Min/Hold.
‧Relative Measurement.
- US$ 280
- Log in for sale price
‧Accurate DC/AC current probe for current measurement.
‧1mDCA high resolution on 4A DC range.
‧0.1mACA high resolution on 400mA AC range.
‧One touch zero for DCA adjustment.
‧23 mm diameter jaw.
‧Connect to an oscilloscope to observe current waveform.
‧Connect to a chart recorder/ datalogger/ DMM to record current data.
‧1mDCA high resolution on 4A DC range.
‧0.1mACA high resolution on 400mA AC range.
‧One touch zero for DCA adjustment.
‧23 mm diameter jaw.
‧Connect to an oscilloscope to observe current waveform.
‧Connect to a chart recorder/ datalogger/ DMM to record current data.
- US$ 220
- Log in for sale price
‧ Accurate digital clamp meter for Current measurement:
AC current: 0 ~ 30A (True RMS).
DC current: 0 ~ 40A.
‧ Accurate digital clamp meter for Voltage measurement:
AC voltage: 0 ~ 400V (True RMS).
DC voltage: 0 ~ 400V.
‧ AC 0.1mA, DC 1mA high resolution.
‧ One touch zero for DCA adjustment.
‧ 23 mm diameter jaw.
‧ Large 3 3/4 digits LCD.
‧ Fast bargraph display (30 times/sec.) for transient observation.
‧ Max/Min and Data Hold functions.
‧ Auto power off.
‧ Easy single rotary switch for any function selection.
AC current: 0 ~ 30A (True RMS).
DC current: 0 ~ 40A.
‧ Accurate digital clamp meter for Voltage measurement:
AC voltage: 0 ~ 400V (True RMS).
DC voltage: 0 ~ 400V.
‧ AC 0.1mA, DC 1mA high resolution.
‧ One touch zero for DCA adjustment.
‧ 23 mm diameter jaw.
‧ Large 3 3/4 digits LCD.
‧ Fast bargraph display (30 times/sec.) for transient observation.
‧ Max/Min and Data Hold functions.
‧ Auto power off.
‧ Easy single rotary switch for any function selection.
- US$ 280
- Log in for sale price
‧Accurate DC/AC digital clamp meter for current measurement.
‧DC 10mA, AC 1mA high resolution.
‧True RMS reading for sine wave, symmetrical square wave, and triangular wave etc.
‧Non-contact frequency measurements.
‧One touch zero for DCA adjustment.
‧23 mm diameter jaw.
‧Large 3 3/4 digits LCD.
‧Fast bargraph display (30 times/sec.) for transient observation.
‧Max/Min and Data Hold functions.
‧Easy single rotary switch for any function selection.
‧Ideal for works in crowded switch box or cable areas.
‧DC 10mA, AC 1mA high resolution.
‧True RMS reading for sine wave, symmetrical square wave, and triangular wave etc.
‧Non-contact frequency measurements.
‧One touch zero for DCA adjustment.
‧23 mm diameter jaw.
‧Large 3 3/4 digits LCD.
‧Fast bargraph display (30 times/sec.) for transient observation.
‧Max/Min and Data Hold functions.
‧Easy single rotary switch for any function selection.
‧Ideal for works in crowded switch box or cable areas.
- US$ 215
- Log in for sale price
‧Accurate and High Resolution.
‧23 mm Conductor Diameter.
‧One Touch Zero.
‧23 mm Conductor Diameter.
‧One Touch Zero.
- US$ 99
- Log in for sale price
‧Accurate AC digital clamp meter for leakage current measurement.
‧AC current measurement: 0 ~ 60A.
‧AC voltage measurement: 0 ~ 400V.
‧10μA ultra high resolution on 40mA range.
‧Shield transformer jaws to minimize the effect of external stray magnetic field.
‧Large jaw with 30 mm diameter.
‧ACA Five Ranges (40mA, 400mA, 4A, 40A, 60A) for all application.
‧A filter circuit is designed to eliminate the effect of high frequency noise and harmonics for AC current measurement.
‧Large 3 3/4 digits LCD.
‧Fast bargraph display (30 times/sec.) for transient observation.
‧Continuity and Frequency measurements.
‧Max/Min, Data Hold functions, and Relative Measurement.
‧Easy single rotary switch for any function selection.
‧600V overload protection for ohm measurement.
‧AC current measurement: 0 ~ 60A.
‧AC voltage measurement: 0 ~ 400V.
‧10μA ultra high resolution on 40mA range.
‧Shield transformer jaws to minimize the effect of external stray magnetic field.
‧Large jaw with 30 mm diameter.
‧ACA Five Ranges (40mA, 400mA, 4A, 40A, 60A) for all application.
‧A filter circuit is designed to eliminate the effect of high frequency noise and harmonics for AC current measurement.
‧Large 3 3/4 digits LCD.
‧Fast bargraph display (30 times/sec.) for transient observation.
‧Continuity and Frequency measurements.
‧Max/Min, Data Hold functions, and Relative Measurement.
‧Easy single rotary switch for any function selection.
‧600V overload protection for ohm measurement.
- US$ 225
- Log in for sale price
‧10 mA high resolution on 40A DC/AC range.
‧Temperature (℃ or ℉) and Capacitance.
‧One touch zero for DCA adjustment.
‧Auto-range for V, A, Ω, F, and temperature.
‧23 mm diameter jaw.
‧Auto-power-off (15 minutes).
‧Fast bargraph display (30 times/sec.) for transient observation.
‧Continuity and frequency measurements.
‧Max/Min and Data Hold functions.
‧600V overload protection for ohm measurement.
‧Ideal for works in crowded switch box or cable areas.
‧Temperature (℃ or ℉) and Capacitance.
‧One touch zero for DCA adjustment.
‧Auto-range for V, A, Ω, F, and temperature.
‧23 mm diameter jaw.
‧Auto-power-off (15 minutes).
‧Fast bargraph display (30 times/sec.) for transient observation.
‧Continuity and frequency measurements.
‧Max/Min and Data Hold functions.
‧600V overload protection for ohm measurement.
‧Ideal for works in crowded switch box or cable areas.
- US$ 215
- Log in for sale price
‧ Accurate DC/AC digital clamp meter for current measurement.
‧10mA high resolution on 40A DC/AC range.
‧One touch zero for DCA adjustment.
‧23 mm diameter jaw.
‧Large 3 3/4 digits LCD.
‧Fast bargraph display (30 times/sec.) for transient observation.
‧Continuity and frequency measurements.
‧Max/Min and Data Hold functions.
‧600V overload protection for ohm measurement.
‧Easy single rotary switch for any function selection.
‧Ideal for works in crowded switch box or cable areas.
‧10mA high resolution on 40A DC/AC range.
‧One touch zero for DCA adjustment.
‧23 mm diameter jaw.
‧Large 3 3/4 digits LCD.
‧Fast bargraph display (30 times/sec.) for transient observation.
‧Continuity and frequency measurements.
‧Max/Min and Data Hold functions.
‧600V overload protection for ohm measurement.
‧Easy single rotary switch for any function selection.
‧Ideal for works in crowded switch box or cable areas.
- US$ 165
- Log in for sale price
•ACA: 20A, 200A, 600A.
•Peak /Data Hold.
•Frequency Count /Diode Check.
•Continuity Buzzer.
•Low Battery Indication.
•Peak /Data Hold.
•Frequency Count /Diode Check.
•Continuity Buzzer.
•Low Battery Indication.
- US$ 55
- Log in for sale price
.jpg)
‧3-3/4 Digital LCD with bar-graph.
‧Auto-Ranging on Volt, Ohm, Current, Frequency measurements.
‧Auto-power off.
‧Data Hold mode.
‧MAX/MIN Hold mode.
‧Zero Adjustment/Relative Reading.
‧PEAK Hold mode.(only ACV and ACA Range)
‧Auto-Ranging on Volt, Ohm, Current, Frequency measurements.
‧Auto-power off.
‧Data Hold mode.
‧MAX/MIN Hold mode.
‧Zero Adjustment/Relative Reading.
‧PEAK Hold mode.(only ACV and ACA Range)
- US$ 198
- Log in for sale price
‧Compact Size.
‧AC/DC Current Measurement (AC 700A / DC 800A).
‧600 V AC & 200V DC, Ohm / Continuity Beeper.
‧One Touch DCA Zero.
‧AC/DC Current Measurement (AC 700A / DC 800A).
‧600 V AC & 200V DC, Ohm / Continuity Beeper.
‧One Touch DCA Zero.
- US$ 83
- Log in for sale price
.jpg)
‧Variable-frequency drives (VFD) V & Hz measurement.
‧LoZ voltage measurement to drain ghost voltages.
‧Check 3 phase sequence.
‧Motor Inrush current measurement.
‧True RMS reading on AC and DC+AC mode. (3901)
‧uA measurement for HVAC flame sensors. (3901)
‧mV measurement range to interface with other accessories. (3901)
‧Crest Factor & Harmonic ratio measurement. (3901)
‧Data hold, Auto hold & Peak hold mode.
‧Max/Min record mode.
‧Data memory & read function.
‧LoZ voltage measurement to drain ghost voltages.
‧Check 3 phase sequence.
‧Motor Inrush current measurement.
‧True RMS reading on AC and DC+AC mode. (3901)
‧uA measurement for HVAC flame sensors. (3901)
‧mV measurement range to interface with other accessories. (3901)
‧Crest Factor & Harmonic ratio measurement. (3901)
‧Data hold, Auto hold & Peak hold mode.
‧Max/Min record mode.
‧Data memory & read function.
- US$ 63
- Log in for sale price
