Traditional Chinese
English
Records with Date and Time Stamp.
PROVA 1660
Measurements of 1Φand 3ΦTransformer/VT/CT Turns Ratio. VT/PT ratio 0.8~10000, CT ratio 0.8~2000. Graphical and Literal Illustration of Measurements and Connections with Large Back-lighted Dot Matrix 240 x 128 LCD. Display Test Data with Nameplate Transformer Values for Easy Interpretation. Ten Test Frequencies (50~400Hz). Display Turns Ratio, Deviation, Secondary Output, Excitation Voltage and Current, Phase Angle and Nameplate Transformer/VT/CT Values in one page for easy transformer quality interpretation. Check for Live Test Points, Short Circuit, Open Circuit, and Reverse Polarity before Each Measurement. Message is displayed to Warn Users (But, checking is not performed once measurement starts). Store 4096 Files of Transformer Nameplate Values (VT/PT/CT, 1Φ/3Φ, Test Frequency, Primary and Secondary Voltages or Ratio, RCF) and Measuring Data. 9 types of 3Φ Windings Connections pre-installed for easy user selection. Wireless Blue Tooth Communication with PC. Select Filter to Remove Field Noise (Slow, Normal, Fast). Disable or Enable Auto-Power-Off with Programmable Time. Built-in calendar clock.
Records with Date and Time Stamp. Powerful Lithium Battery (3400mAH) with built-in Charging Circuit. User Programmable RCF (Reference Correction Factor, 0.99~1.01) to Correct Accuracy within 1% Error. Friendly File System for Easy On-site Data Retrieval and Nameplate Values Management. PC Application Software included.
Transformer Turns Ratio Meter
Availability: In stock
Records with Date and Time Stamp.
.jpg)
- Specification
- Application
Electrical Specifications:
Reference Conditions：23℃± 5℃ (30 to 50% RH) range.
Add 25ppm/℃ for 0° to 18℃ and 28° to 50℃ to all accuracy specifications.
No external electrical or magnetic fields.
Output current ≦150 mA for VT/PT and ≦50mA for CT. Calibration cycle is 1 year.
|
Ratio Range (VT/PT) |
Autoranging：0.8000 to 10000：1 |
|
|
Accuracy (70Hz) |
Ratio Range |
Accuracy (% of Reading) |
|
0.8000 ~ 999.99 |
± 0.1% |
|
|
1000.0 ~ 4999.9 |
± 0.2% |
|
|
5000.0 ~ 10000 |
± 0.25% |
|
|
Ratio Range (CT) |
Autoranging：0.8000 to 2000.0 |
|
|
Accuracy (70Hz) |
Ratio Range |
Accuracy (% of Reading) |
|
0.8000 to 2000.0 |
± 0.5% |
|
|
Excitation Signal |
VT/PT Mode：34Vrms max CT Mode：Auto Level 0 to1A, 0.1 to 20Vrms |
|
|
Excitation Current Display |
Range：0 to 1000mA Accuracy：± (2% of Reading +2mA) |
|
|
Excitation Frequency (Hz) |
50, 55, 60, 70, 100, 120, 200, 240, 300, 400 |
|
|
Display |
5” Large dot matrix LCD display (240*128) with backlight |
|
|
Power Source |
Rechargeable Lithium Battery, 3400mAh |
|
|
Battery Life |
Over 10 hrs of continuous operation. Battery life (%) indication |
|
|
Battery Charger |
Universal input (90 to 264Vrms input) |
|
|
Charging Time |
＜4 hrs |
|
|
Data Storage |
4096 Files Each (VTM, CTM, VTR, CTR, BMP) |
|
|
Date/ Time |
Battery-backed, Real-time Calendar clock |
|
|
Measurement Method |
ANSI / IEEE C57.12.90 and IEC 600076.1 |
|
|
Operation Environment |
5℃ ~ 50℃, 85% RH |
|
|
Storage Environment |
-20℃ ~ 60℃, 75% RH |
|
Accessory:
1. Test leads (set of 2)
2. Alligator clips (4pcs.)
3. Rechargeable lithium battery
4. User manual
5. AC adaptor
6. Power cord
7. Software CD & Manual
8. Carrying bag
Related Products
•Power Analysis for 3P4W, 3P3W, 1P2W, 1P3W.
•True RMS value (V123 and I123).
•Active Power (W, KW, MW, GW).
•Apparent and Reactive Power (KVA, KVAR).
•Power Factor (PF), Phase Angle (Φ).
•Energy (WH, KWH, KVARH, PFH).
•AC Current (see below) and Voltage measurement: True RMS, Auto Range.
1. 6830A+6801: 0.04A to 100A
2. 6830A+6802: 0.4A to 1000A
3. 6830A+3007: 10A to 3000A
4. 6830A+3009: 6A to 1200A
5. 6830A+3006: 20A to 6000A
•Capable of analyzing IT standby power consumption to the maximum demand of a factory.
•Display of 35 Parameters in One Screen (3P4W).
•Programmable CT (1 to 600) and PT (1 to 3000) Ratios.
•Display of Overlapped Voltage and Current Waveform.
•Average Demand (AD in W, KW, MW).
•Maximum Demand (MD in KW, MW, KVA, MVA) with Programmable Period.
•Harmonic Analysis to the 99th Order.
•Display of 50 Harmonics in one Screen with Waveform.
•Display of Waveform with Peak Values (1024 Samples / Period).
•Analysis of Total Harmonic Distortion (THD-F).
•Graphic Phasor Diagram with 3 Phase System Parameters.
•Capture 28 Transient Events (Time + Cycles) with Programmable Threshold (%).
•DIP, SWELL, and OUTAGE are included in transient events.
•3 Phase Voltage or Current Unbalance Ratio (VUR, IUR).
•3 Phase Voltage or Current Unbalance Factor (d0%, d2%).
•Calculated Unbalanced Current through Neutral Line (In).
•512K Memory with Programmable Interval (Sampling time from 2 to 3000 seconds, 17,000 records for 3P4W system).
•Output of Waveform, Power Parameters and Harmonics at Command.
•Large Dot Matrix LCD Display with Backlight.
•Software to work with PC via Optical Isolated RS-232C to USB Interface.
•Built-in timer and calendar for data logging.
Conductor Size:
■ Model 6801(100A) 30mm(approx)
210mm(L)*62mm(W)*36mm(H)，200g(Weight)
■ Model 6802(1000A) 55mm(approx)，64*24mm(bus bar)
244mm(L)*97mm(W)*46mm(H)，600g(Weight)
■ Model 3007 (3000A) 24in/610mm(Probe Length)
130mm(L)*80mm(W)*43mm(H)，410g(Weight)
■ Model 3009 (1200A) 18in/460mm(Probe Length)
130mm(L)*80mm(W)*43mm(H)，390g(Weight)
■ Model 3006(6000A)
130mm(L) x 80mm(W) x 43mm(H)，430g(Weight)
•True RMS value (V123 and I123).
•Active Power (W, KW, MW, GW).
•Apparent and Reactive Power (KVA, KVAR).
•Power Factor (PF), Phase Angle (Φ).
•Energy (WH, KWH, KVARH, PFH).
•AC Current (see below) and Voltage measurement: True RMS, Auto Range.
1. 6830A+6801: 0.04A to 100A
2. 6830A+6802: 0.4A to 1000A
3. 6830A+3007: 10A to 3000A
4. 6830A+3009: 6A to 1200A
5. 6830A+3006: 20A to 6000A
•Capable of analyzing IT standby power consumption to the maximum demand of a factory.
•Display of 35 Parameters in One Screen (3P4W).
•Programmable CT (1 to 600) and PT (1 to 3000) Ratios.
•Display of Overlapped Voltage and Current Waveform.
•Average Demand (AD in W, KW, MW).
•Maximum Demand (MD in KW, MW, KVA, MVA) with Programmable Period.
•Harmonic Analysis to the 99th Order.
•Display of 50 Harmonics in one Screen with Waveform.
•Display of Waveform with Peak Values (1024 Samples / Period).
•Analysis of Total Harmonic Distortion (THD-F).
•Graphic Phasor Diagram with 3 Phase System Parameters.
•Capture 28 Transient Events (Time + Cycles) with Programmable Threshold (%).
•DIP, SWELL, and OUTAGE are included in transient events.
•3 Phase Voltage or Current Unbalance Ratio (VUR, IUR).
•3 Phase Voltage or Current Unbalance Factor (d0%, d2%).
•Calculated Unbalanced Current through Neutral Line (In).
•512K Memory with Programmable Interval (Sampling time from 2 to 3000 seconds, 17,000 records for 3P4W system).
•Output of Waveform, Power Parameters and Harmonics at Command.
•Large Dot Matrix LCD Display with Backlight.
•Software to work with PC via Optical Isolated RS-232C to USB Interface.
•Built-in timer and calendar for data logging.
Conductor Size:
■ Model 6801(100A) 30mm(approx)
210mm(L)*62mm(W)*36mm(H)，200g(Weight)
■ Model 6802(1000A) 55mm(approx)，64*24mm(bus bar)
244mm(L)*97mm(W)*46mm(H)，600g(Weight)
■ Model 3007 (3000A) 24in/610mm(Probe Length)
130mm(L)*80mm(W)*43mm(H)，410g(Weight)
■ Model 3009 (1200A) 18in/460mm(Probe Length)
130mm(L)*80mm(W)*43mm(H)，390g(Weight)
■ Model 3006(6000A)
130mm(L) x 80mm(W) x 43mm(H)，430g(Weight)
- US$ 2475
- Log in for sale price
•Power Analysis for 3P4W, 3P3W, 1P2W, 1P3W.
•True RMS value (V123 and I123).
•Active Power (W, KW, MW, GW).
•Apparent and Reactive Power (KVA, KVAR).
•Power Factor (PF), Phase Angle (Φ).
•Energy (WH, KWH, KVARH, PFH).
•AC Current (see below) and Voltage measurement: True RMS, Auto Range.
1. 6830A+6801: 0.04A to 100A
2. 6830A+6802: 0.4A to 1000A
3. 6830A+3007: 10A to 3000A
4. 6830A+3009: 6A to 1200A
5. 6830A+3006: 20A to 6000A
•Capable of analyzing IT standby power consumption to the maximum demand of a factory.
•Display of 35 Parameters in One Screen (3P4W).
•Programmable CT (1 to 600) and PT (1 to 3000) Ratios.
•Display of Overlapped Voltage and Current Waveform.
•Average Demand (AD in W, KW, MW).
•Maximum Demand (MD in KW, MW, KVA, MVA) with Programmable Period.
•Harmonic Analysis to the 99th Order.
•Display of 50 Harmonics in one Screen with Waveform.
•Display of Waveform with Peak Values (1024 Samples / Period).
•Analysis of Total Harmonic Distortion (THD-F).
•Graphic Phasor Diagram with 3 Phase System Parameters.
•Capture 28 Transient Events (Time + Cycles) with Programmable Threshold (%).
•DIP, SWELL, and OUTAGE are included in transient events.
•3 Phase Voltage or Current Unbalance Ratio (VUR, IUR).
•3 Phase Voltage or Current Unbalance Factor (d0%, d2%).
•Calculated Unbalanced Current through Neutral Line (In).
•512K Memory with Programmable Interval (Sampling time from 2 to 3000 seconds, 17,000 records for 3P4W system).
•Output of Waveform, Power Parameters and Harmonics at Command.
•Large Dot Matrix LCD Display with Backlight.
•Software to work with PC via Optical Isolated RS-232C to USB Interface.
•Built-in timer and calendar for data logging.
Conductor Size:
■ Model 6801(100A) 30mm(approx)
210mm(L)*62mm(W)*36mm(H)，200g(Weight)
■ Model 6802(1000A) 55mm(approx)，64*24mm(bus bar)
244mm(L)*97mm(W)*46mm(H)，600g(Weight)
■ Model 3007 (3000A) 24in/610mm(Probe Length)
130mm(L)*80mm(W)*43mm(H)，410g(Weight)
■ Model 3009 (1200A) 18in/460mm(Probe Length)
130mm(L)*80mm(W)*43mm(H)，390g(Weight)
■ Model 3006(6000A)
130mm(L) x 80mm(W) x 43mm(H)，430g(Weight)
•True RMS value (V123 and I123).
•Active Power (W, KW, MW, GW).
•Apparent and Reactive Power (KVA, KVAR).
•Power Factor (PF), Phase Angle (Φ).
•Energy (WH, KWH, KVARH, PFH).
•AC Current (see below) and Voltage measurement: True RMS, Auto Range.
1. 6830A+6801: 0.04A to 100A
2. 6830A+6802: 0.4A to 1000A
3. 6830A+3007: 10A to 3000A
4. 6830A+3009: 6A to 1200A
5. 6830A+3006: 20A to 6000A
•Capable of analyzing IT standby power consumption to the maximum demand of a factory.
•Display of 35 Parameters in One Screen (3P4W).
•Programmable CT (1 to 600) and PT (1 to 3000) Ratios.
•Display of Overlapped Voltage and Current Waveform.
•Average Demand (AD in W, KW, MW).
•Maximum Demand (MD in KW, MW, KVA, MVA) with Programmable Period.
•Harmonic Analysis to the 99th Order.
•Display of 50 Harmonics in one Screen with Waveform.
•Display of Waveform with Peak Values (1024 Samples / Period).
•Analysis of Total Harmonic Distortion (THD-F).
•Graphic Phasor Diagram with 3 Phase System Parameters.
•Capture 28 Transient Events (Time + Cycles) with Programmable Threshold (%).
•DIP, SWELL, and OUTAGE are included in transient events.
•3 Phase Voltage or Current Unbalance Ratio (VUR, IUR).
•3 Phase Voltage or Current Unbalance Factor (d0%, d2%).
•Calculated Unbalanced Current through Neutral Line (In).
•512K Memory with Programmable Interval (Sampling time from 2 to 3000 seconds, 17,000 records for 3P4W system).
•Output of Waveform, Power Parameters and Harmonics at Command.
•Large Dot Matrix LCD Display with Backlight.
•Software to work with PC via Optical Isolated RS-232C to USB Interface.
•Built-in timer and calendar for data logging.
Conductor Size:
■ Model 6801(100A) 30mm(approx)
210mm(L)*62mm(W)*36mm(H)，200g(Weight)
■ Model 6802(1000A) 55mm(approx)，64*24mm(bus bar)
244mm(L)*97mm(W)*46mm(H)，600g(Weight)
■ Model 3007 (3000A) 24in/610mm(Probe Length)
130mm(L)*80mm(W)*43mm(H)，410g(Weight)
■ Model 3009 (1200A) 18in/460mm(Probe Length)
130mm(L)*80mm(W)*43mm(H)，390g(Weight)
■ Model 3006(6000A)
130mm(L) x 80mm(W) x 43mm(H)，430g(Weight)
- US$ 2475
- Log in for sale price
•Power Analysis for 3P4W, 3P3W, 1P2W, 1P3W.
•True RMS value (V123 and I123).
•Active Power (W, KW, MW, GW).
•Apparent and Reactive Power (KVA, KVAR).
•Power Factor (PF), Phase Angle (Φ).
•Energy (WH, KWH, KVARH, PFH).
•AC Current (see below) and Voltage measurement: True RMS, Auto Range.
1. 6830A+6801: 0.04A to 100A
2. 6830A+6802: 0.4A to 1000A
3. 6830A+3007: 10A to 3000A
4. 6830A+3009: 6A to 1200A
5. 6830A+3006: 20A to 6000A
•Capable of analyzing IT standby power consumption to the maximum demand of a factory.
•Display of 35 Parameters in One Screen (3P4W).
•Programmable CT (1 to 600) and PT (1 to 3000) Ratios.
•Display of Overlapped Voltage and Current Waveform.
•Average Demand (AD in W, KW, MW).
•Maximum Demand (MD in KW, MW, KVA, MVA) with Programmable Period.
•Harmonic Analysis to the 99th Order.
•Display of 50 Harmonics in one Screen with Waveform.
•Display of Waveform with Peak Values (1024 Samples / Period).
•Analysis of Total Harmonic Distortion (THD-F).
•Graphic Phasor Diagram with 3 Phase System Parameters.
•Capture 28 Transient Events (Time + Cycles) with Programmable Threshold (%).
•DIP, SWELL, and OUTAGE are included in transient events.
•3 Phase Voltage or Current Unbalance Ratio (VUR, IUR).
•3 Phase Voltage or Current Unbalance Factor (d0%, d2%).
•Calculated Unbalanced Current through Neutral Line (In).
•512K Memory with Programmable Interval (Sampling time from 2 to 3000 seconds, 17,000 records for 3P4W system).
•Output of Waveform, Power Parameters and Harmonics at Command.
•Large Dot Matrix LCD Display with Backlight.
•Software to work with PC via Optical Isolated RS-232C to USB Interface.
•Built-in timer and calendar for data logging.
Conductor Size:
■ Model 6801(100A) 30mm(approx)
210mm(L)*62mm(W)*36mm(H)，200g(Weight)
■ Model 6802(1000A) 55mm(approx)，64*24mm(bus bar)
244mm(L)*97mm(W)*46mm(H)，600g(Weight)
■ Model 3007 (3000A) 24in/610mm(Probe Length)
130mm(L)*80mm(W)*43mm(H)，410g(Weight)
■ Model 3009 (1200A) 18in/460mm(Probe Length)
130mm(L)*80mm(W)*43mm(H)，390g(Weight)
■ Model 3006(6000A)
130mm(L) x 80mm(W) x 43mm(H)，430g(Weight)
•True RMS value (V123 and I123).
•Active Power (W, KW, MW, GW).
•Apparent and Reactive Power (KVA, KVAR).
•Power Factor (PF), Phase Angle (Φ).
•Energy (WH, KWH, KVARH, PFH).
•AC Current (see below) and Voltage measurement: True RMS, Auto Range.
1. 6830A+6801: 0.04A to 100A
2. 6830A+6802: 0.4A to 1000A
3. 6830A+3007: 10A to 3000A
4. 6830A+3009: 6A to 1200A
5. 6830A+3006: 20A to 6000A
•Capable of analyzing IT standby power consumption to the maximum demand of a factory.
•Display of 35 Parameters in One Screen (3P4W).
•Programmable CT (1 to 600) and PT (1 to 3000) Ratios.
•Display of Overlapped Voltage and Current Waveform.
•Average Demand (AD in W, KW, MW).
•Maximum Demand (MD in KW, MW, KVA, MVA) with Programmable Period.
•Harmonic Analysis to the 99th Order.
•Display of 50 Harmonics in one Screen with Waveform.
•Display of Waveform with Peak Values (1024 Samples / Period).
•Analysis of Total Harmonic Distortion (THD-F).
•Graphic Phasor Diagram with 3 Phase System Parameters.
•Capture 28 Transient Events (Time + Cycles) with Programmable Threshold (%).
•DIP, SWELL, and OUTAGE are included in transient events.
•3 Phase Voltage or Current Unbalance Ratio (VUR, IUR).
•3 Phase Voltage or Current Unbalance Factor (d0%, d2%).
•Calculated Unbalanced Current through Neutral Line (In).
•512K Memory with Programmable Interval (Sampling time from 2 to 3000 seconds, 17,000 records for 3P4W system).
•Output of Waveform, Power Parameters and Harmonics at Command.
•Large Dot Matrix LCD Display with Backlight.
•Software to work with PC via Optical Isolated RS-232C to USB Interface.
•Built-in timer and calendar for data logging.
Conductor Size:
■ Model 6801(100A) 30mm(approx)
210mm(L)*62mm(W)*36mm(H)，200g(Weight)
■ Model 6802(1000A) 55mm(approx)，64*24mm(bus bar)
244mm(L)*97mm(W)*46mm(H)，600g(Weight)
■ Model 3007 (3000A) 24in/610mm(Probe Length)
130mm(L)*80mm(W)*43mm(H)，410g(Weight)
■ Model 3009 (1200A) 18in/460mm(Probe Length)
130mm(L)*80mm(W)*43mm(H)，390g(Weight)
■ Model 3006(6000A)
130mm(L) x 80mm(W) x 43mm(H)，430g(Weight)
- US$ 2475
- Log in for sale price
•Power Analysis for 3P4W, 3P3W, 1P2W, 1P3W.
•True RMS value (V123 and I123).
•Active Power (W, KW, MW, GW).
•Apparent and Reactive Power (KVA, KVAR).
•Power Factor (PF), Phase Angle (Φ).
•Energy (WH, KWH, KVARH, PFH).
•AC Current (see below) and Voltage measurement: True RMS, Auto Range.
1. 6830A+6801: 0.04A to 100A
2. 6830A+6802: 0.4A to 1000A
3. 6830A+3007: 10A to 3000A
4. 6830A+3009: 6A to 1200A
5. 6830A+3006: 20A to 6000A
•Capable of analyzing IT standby power consumption to the maximum demand of a factory.
•Display of 35 Parameters in One Screen (3P4W).
•Programmable CT (1 to 600) and PT (1 to 3000) Ratios.
•Display of Overlapped Voltage and Current Waveform.
•Average Demand (AD in W, KW, MW).
•Maximum Demand (MD in KW, MW, KVA, MVA) with Programmable Period.
•Harmonic Analysis to the 99th Order.
•Display of 50 Harmonics in one Screen with Waveform.
•Display of Waveform with Peak Values (1024 Samples / Period).
•Analysis of Total Harmonic Distortion (THD-F).
•Graphic Phasor Diagram with 3 Phase System Parameters.
•Capture 28 Transient Events (Time + Cycles) with Programmable Threshold (%).
•DIP, SWELL, and OUTAGE are included in transient events.
•3 Phase Voltage or Current Unbalance Ratio (VUR, IUR).
•3 Phase Voltage or Current Unbalance Factor (d0%, d2%).
•Calculated Unbalanced Current through Neutral Line (In).
•512K Memory with Programmable Interval (Sampling time from 2 to 3000 seconds, 17,000 records for 3P4W system).
•Output of Waveform, Power Parameters and Harmonics at Command.
•Large Dot Matrix LCD Display with Backlight.
•Software to work with PC via Optical Isolated RS-232C to USB Interface.
•Built-in timer and calendar for data logging.
Conductor Size:
■ Model 6801(100A) 30mm(approx)
210mm(L)*62mm(W)*36mm(H)，200g(Weight)
■ Model 6802(1000A) 55mm(approx)，64*24mm(bus bar)
244mm(L)*97mm(W)*46mm(H)，600g(Weight)
■ Model 3007 (3000A) 24in/610mm(Probe Length)
130mm(L)*80mm(W)*43mm(H)，410g(Weight)
■ Model 3009 (1200A) 18in/460mm(Probe Length)
130mm(L)*80mm(W)*43mm(H)，390g(Weight)
■ Model 3006(6000A)
130mm(L) x 80mm(W) x 43mm(H)，430g(Weight)
•True RMS value (V123 and I123).
•Active Power (W, KW, MW, GW).
•Apparent and Reactive Power (KVA, KVAR).
•Power Factor (PF), Phase Angle (Φ).
•Energy (WH, KWH, KVARH, PFH).
•AC Current (see below) and Voltage measurement: True RMS, Auto Range.
1. 6830A+6801: 0.04A to 100A
2. 6830A+6802: 0.4A to 1000A
3. 6830A+3007: 10A to 3000A
4. 6830A+3009: 6A to 1200A
5. 6830A+3006: 20A to 6000A
•Capable of analyzing IT standby power consumption to the maximum demand of a factory.
•Display of 35 Parameters in One Screen (3P4W).
•Programmable CT (1 to 600) and PT (1 to 3000) Ratios.
•Display of Overlapped Voltage and Current Waveform.
•Average Demand (AD in W, KW, MW).
•Maximum Demand (MD in KW, MW, KVA, MVA) with Programmable Period.
•Harmonic Analysis to the 99th Order.
•Display of 50 Harmonics in one Screen with Waveform.
•Display of Waveform with Peak Values (1024 Samples / Period).
•Analysis of Total Harmonic Distortion (THD-F).
•Graphic Phasor Diagram with 3 Phase System Parameters.
•Capture 28 Transient Events (Time + Cycles) with Programmable Threshold (%).
•DIP, SWELL, and OUTAGE are included in transient events.
•3 Phase Voltage or Current Unbalance Ratio (VUR, IUR).
•3 Phase Voltage or Current Unbalance Factor (d0%, d2%).
•Calculated Unbalanced Current through Neutral Line (In).
•512K Memory with Programmable Interval (Sampling time from 2 to 3000 seconds, 17,000 records for 3P4W system).
•Output of Waveform, Power Parameters and Harmonics at Command.
•Large Dot Matrix LCD Display with Backlight.
•Software to work with PC via Optical Isolated RS-232C to USB Interface.
•Built-in timer and calendar for data logging.
Conductor Size:
■ Model 6801(100A) 30mm(approx)
210mm(L)*62mm(W)*36mm(H)，200g(Weight)
■ Model 6802(1000A) 55mm(approx)，64*24mm(bus bar)
244mm(L)*97mm(W)*46mm(H)，600g(Weight)
■ Model 3007 (3000A) 24in/610mm(Probe Length)
130mm(L)*80mm(W)*43mm(H)，410g(Weight)
■ Model 3009 (1200A) 18in/460mm(Probe Length)
130mm(L)*80mm(W)*43mm(H)，390g(Weight)
■ Model 3006(6000A)
130mm(L) x 80mm(W) x 43mm(H)，430g(Weight)
- US$ 2475
- Log in for sale price
.jpg)
MODEL PROVA 19, 21, 23
‧ True RMS value (V and A).
‧ Leakage Current Measurement at 10 μ A Resolution.
‧ Harmonic Analysis (V and A) to the 99 th Order.
‧ Better Understanding of High Frequency Harmonic Analysis (up to 5/6 KHz).
‧ Non-interrupted Harmonic Analysis.
‧ Analysis of Total Harmonic Distortion (THD-F).
‧ Analysis of Crest Factor (C.F.).
‧Fast Peak Function (33 μ s and 39 μ s).
‧ Programmable CT Ratio (1 to 250).
Model 21(50A) and 23(100A)
‧ W, KW, H.P.
‧ VA, KVA, VAR, KVAR.
‧ PF, Phase Angle ( Φ ).
‧Energy (mWH, WH, KWH).
‧ Analysis of Standby Power Consumption.
‧Balanced 3 Φ Power Quality.
‧Balanced 3 Φ Sequence.
‧ True RMS value (V and A).
‧ Leakage Current Measurement at 10 μ A Resolution.
‧ Harmonic Analysis (V and A) to the 99 th Order.
‧ Better Understanding of High Frequency Harmonic Analysis (up to 5/6 KHz).
‧ Non-interrupted Harmonic Analysis.
‧ Analysis of Total Harmonic Distortion (THD-F).
‧ Analysis of Crest Factor (C.F.).
‧Fast Peak Function (33 μ s and 39 μ s).
‧ Programmable CT Ratio (1 to 250).
Model 21(50A) and 23(100A)
‧ W, KW, H.P.
‧ VA, KVA, VAR, KVAR.
‧ PF, Phase Angle ( Φ ).
‧Energy (mWH, WH, KWH).
‧ Analysis of Standby Power Consumption.
‧Balanced 3 Φ Power Quality.
‧Balanced 3 Φ Sequence.
- US$ 430
- Log in for sale price
.jpg)
MODEL PROVA 19, 21, 23
‧ True RMS value (V and A).
‧ Leakage Current Measurement at 10 μ A Resolution.
‧ Harmonic Analysis (V and A) to the 99 th Order.
‧ Better Understanding of High Frequency Harmonic Analysis (up to 5/6 KHz).
‧ Non-interrupted Harmonic Analysis.
‧ Analysis of Total Harmonic Distortion (THD-F).
‧ Analysis of Crest Factor (C.F.).
‧Fast Peak Function (33 μ s and 39 μ s).
‧ Programmable CT Ratio (1 to 250).
Model 21(50A) and 23(100A)
‧ W, KW, H.P.
‧ VA, KVA, VAR, KVAR.
‧ PF, Phase Angle ( Φ ).
‧Energy (mWH, WH, KWH).
‧ Analysis of Standby Power Consumption.
‧Balanced 3 Φ Power Quality.
‧Balanced 3 Φ Sequence.
‧ True RMS value (V and A).
‧ Leakage Current Measurement at 10 μ A Resolution.
‧ Harmonic Analysis (V and A) to the 99 th Order.
‧ Better Understanding of High Frequency Harmonic Analysis (up to 5/6 KHz).
‧ Non-interrupted Harmonic Analysis.
‧ Analysis of Total Harmonic Distortion (THD-F).
‧ Analysis of Crest Factor (C.F.).
‧Fast Peak Function (33 μ s and 39 μ s).
‧ Programmable CT Ratio (1 to 250).
Model 21(50A) and 23(100A)
‧ W, KW, H.P.
‧ VA, KVA, VAR, KVAR.
‧ PF, Phase Angle ( Φ ).
‧Energy (mWH, WH, KWH).
‧ Analysis of Standby Power Consumption.
‧Balanced 3 Φ Power Quality.
‧Balanced 3 Φ Sequence.
- US$ 396
- Log in for sale price
.jpg)
‧Active (W, KW, HP), reactive (VAR, KVAR) and apparent (VA, KVA) power.
‧Power factor (PF), phase angle (Φ), and energy (WH, KWH).
‧Non-interrupted AC current harmonic analysis.
‧1 to 99th order of harmonics at 2.0% basic accuracy.
‧Total harmonic distortion (%THD-F) and crest factor (CF).
‧True RMS measurement of V and A at 0.5% basic accuracy.
‧Fast peak function (39μs for 50 Hz, 33μs for 60Hz).
‧Resistance and Continuity with Beeper
‧Measurement of balanced 3Φ power.
‧Measurement of balanced 3Φ sequence.
‧Programmable CT ratio from 1 to 250.
‧Max, Min and data hold functions.
‧Active power in H.P.
‧Auto power off function in 30 minutes.
‧AC current：0~1500A.
‧Power factor (PF), phase angle (Φ), and energy (WH, KWH).
‧Non-interrupted AC current harmonic analysis.
‧1 to 99th order of harmonics at 2.0% basic accuracy.
‧Total harmonic distortion (%THD-F) and crest factor (CF).
‧True RMS measurement of V and A at 0.5% basic accuracy.
‧Fast peak function (39μs for 50 Hz, 33μs for 60Hz).
‧Resistance and Continuity with Beeper
‧Measurement of balanced 3Φ power.
‧Measurement of balanced 3Φ sequence.
‧Programmable CT ratio from 1 to 250.
‧Max, Min and data hold functions.
‧Active power in H.P.
‧Auto power off function in 30 minutes.
‧AC current：0~1500A.
- US$ 594
- Log in for sale price
MODEL PROVA 19, 21, 23
‧ True RMS value (V and A).
‧ Leakage Current Measurement at 10 μ A Resolution.
‧ Harmonic Analysis (V and A) to the 99 th Order.
‧ Better Understanding of High Frequency Harmonic Analysis (up to 5/6 KHz).
‧ Non-interrupted Harmonic Analysis.
‧ Analysis of Total Harmonic Distortion (THD-F).
‧ Analysis of Crest Factor (C.F.).
‧Fast Peak Function (33 μ s and 39 μ s).
‧ Programmable CT Ratio (1 to 250).
Model 21(50A) and 23(100A)
‧ W, KW, H.P.
‧ VA, KVA, VAR, KVAR.
‧ PF, Phase Angle ( Φ ).
‧Energy (mWH, WH, KWH).
‧ Analysis of Standby Power Consumption.
‧Balanced 3 Φ Power Quality.
‧Balanced 3 Φ Sequence.
‧ True RMS value (V and A).
‧ Leakage Current Measurement at 10 μ A Resolution.
‧ Harmonic Analysis (V and A) to the 99 th Order.
‧ Better Understanding of High Frequency Harmonic Analysis (up to 5/6 KHz).
‧ Non-interrupted Harmonic Analysis.
‧ Analysis of Total Harmonic Distortion (THD-F).
‧ Analysis of Crest Factor (C.F.).
‧Fast Peak Function (33 μ s and 39 μ s).
‧ Programmable CT Ratio (1 to 250).
Model 21(50A) and 23(100A)
‧ W, KW, H.P.
‧ VA, KVA, VAR, KVAR.
‧ PF, Phase Angle ( Φ ).
‧Energy (mWH, WH, KWH).
‧ Analysis of Standby Power Consumption.
‧Balanced 3 Φ Power Quality.
‧Balanced 3 Φ Sequence.
- US$ 363
- Log in for sale price
‧Analysis for Single Phase and Balanced 3 phase system.
‧True RMS Value (V and I).
‧Active Power (K,KW,MW,GW).
‧Apparent (VA,KVA,MVA) and Reactive Power (VAR,KVAR,MVAR).
‧Power Factor (PF), Phase Angle( Φ ).
‧Energy (WH,KWH,KVARH,PFH).
‧Programmable PT(1 to 3000)Ratios.
‧Display of Overlapped Voltage and Current Waveform.
‧Maximum Demand (MD in W,KW,MW) with programmable Period.
‧Harmonic Analysis (V and I) to 50th Order.
‧Display of 25 Harmonics in one screen.
‧Optical Isolated RS-232C Interface.
‧Smart Datalogging to save Battery.
‧Datalogging of 32,64,128 or 256 points/cycles.
‧Analysis of Total Harmonic Distortion (%THD-F).
‧Graphic Phasor Diagram.
‧Capture 128 Transient Events (Time+Cycles+Faults) with Programmable Threshold(%),also can be reviewed in LCD.
‧50000 Records with Programmable Interval (1 to 6000 seconds).
‧Real-time Output of Waveform, Power Parameters and Harmonics at Command.
‧Large Dot Matrix LCD Display with Backlight.
‧Power for Long-term Monitoring.
‧Built -in Calendar Clock for Data Logging.
‧True RMS Value (V and I).
‧Active Power (K,KW,MW,GW).
‧Apparent (VA,KVA,MVA) and Reactive Power (VAR,KVAR,MVAR).
‧Power Factor (PF), Phase Angle( Φ ).
‧Energy (WH,KWH,KVARH,PFH).
‧Programmable PT(1 to 3000)Ratios.
‧Display of Overlapped Voltage and Current Waveform.
‧Maximum Demand (MD in W,KW,MW) with programmable Period.
‧Harmonic Analysis (V and I) to 50th Order.
‧Display of 25 Harmonics in one screen.
‧Optical Isolated RS-232C Interface.
‧Smart Datalogging to save Battery.
‧Datalogging of 32,64,128 or 256 points/cycles.
‧Analysis of Total Harmonic Distortion (%THD-F).
‧Graphic Phasor Diagram.
‧Capture 128 Transient Events (Time+Cycles+Faults) with Programmable Threshold(%),also can be reviewed in LCD.
‧50000 Records with Programmable Interval (1 to 6000 seconds).
‧Real-time Output of Waveform, Power Parameters and Harmonics at Command.
‧Large Dot Matrix LCD Display with Backlight.
‧Power for Long-term Monitoring.
‧Built -in Calendar Clock for Data Logging.
- US$ 980
- Log in for sale price
•Power Analysis for 3P4W, 3P3W, 1P2W, 1P3W.
•True RMS value (V123 and I123).
•Active Power (W, KW, MW, GW).
•Apparent and Reactive Power (KVA, KVAR).
•Power Factor (PF), Phase Angle (Φ).
•Energy (WH, KWH, KVARH, PFH).
•AC Current (see below) and Voltage measurement: True RMS, Auto Range.
1. 6830A+6801: 0.04A to 100A
2. 6830A+6802: 0.4A to 1000A
3. 6830A+3007: 10A to 3000A
4. 6830A+3009: 6A to 1200A
5. 6830A+3006: 20A to 6000A
•Capable of analyzing IT standby power consumption to the maximum demand of a factory.
•Display of 35 Parameters in One Screen (3P4W).
•Programmable CT (1 to 600) and PT (1 to 3000) Ratios.
•Display of Overlapped Voltage and Current Waveform.
•Average Demand (AD in W, KW, MW).
•Maximum Demand (MD in KW, MW, KVA, MVA) with Programmable Period.
•Harmonic Analysis to the 99th Order.
•Display of 50 Harmonics in one Screen with Waveform.
•Display of Waveform with Peak Values (1024 Samples / Period).
•Analysis of Total Harmonic Distortion (THD-F).
•Graphic Phasor Diagram with 3 Phase System Parameters.
•Capture 28 Transient Events (Time + Cycles) with Programmable Threshold (%).
•DIP, SWELL, and OUTAGE are included in transient events.
•3 Phase Voltage or Current Unbalance Ratio (VUR, IUR).
•3 Phase Voltage or Current Unbalance Factor (d0%, d2%).
•Calculated Unbalanced Current through Neutral Line (In).
•512K Memory with Programmable Interval (Sampling time from 2 to 3000 seconds, 17,000 records for 3P4W system).
•Output of Waveform, Power Parameters and Harmonics at Command.
•Large Dot Matrix LCD Display with Backlight.
•Software to work with PC via Optical Isolated RS-232C to USB Interface.
•Built-in timer and calendar for data logging.
Conductor Size:
■ Model 6801(100A) 30mm(approx)
210mm(L)*62mm(W)*36mm(H)，200g(Weight)
■ Model 6802(1000A) 55mm(approx)，64*24mm(bus bar)
244mm(L)*97mm(W)*46mm(H)，600g(Weight)
■ Model 3007 (3000A) 24in/610mm(Probe Length)
130mm(L)*80mm(W)*43mm(H)，410g(Weight)
■ Model 3009 (1200A) 18in/460mm(Probe Length)
130mm(L)*80mm(W)*43mm(H)，390g(Weight)
■ Model 3006(6000A)
130mm(L) x 80mm(W) x 43mm(H)，430g(Weight)
•True RMS value (V123 and I123).
•Active Power (W, KW, MW, GW).
•Apparent and Reactive Power (KVA, KVAR).
•Power Factor (PF), Phase Angle (Φ).
•Energy (WH, KWH, KVARH, PFH).
•AC Current (see below) and Voltage measurement: True RMS, Auto Range.
1. 6830A+6801: 0.04A to 100A
2. 6830A+6802: 0.4A to 1000A
3. 6830A+3007: 10A to 3000A
4. 6830A+3009: 6A to 1200A
5. 6830A+3006: 20A to 6000A
•Capable of analyzing IT standby power consumption to the maximum demand of a factory.
•Display of 35 Parameters in One Screen (3P4W).
•Programmable CT (1 to 600) and PT (1 to 3000) Ratios.
•Display of Overlapped Voltage and Current Waveform.
•Average Demand (AD in W, KW, MW).
•Maximum Demand (MD in KW, MW, KVA, MVA) with Programmable Period.
•Harmonic Analysis to the 99th Order.
•Display of 50 Harmonics in one Screen with Waveform.
•Display of Waveform with Peak Values (1024 Samples / Period).
•Analysis of Total Harmonic Distortion (THD-F).
•Graphic Phasor Diagram with 3 Phase System Parameters.
•Capture 28 Transient Events (Time + Cycles) with Programmable Threshold (%).
•DIP, SWELL, and OUTAGE are included in transient events.
•3 Phase Voltage or Current Unbalance Ratio (VUR, IUR).
•3 Phase Voltage or Current Unbalance Factor (d0%, d2%).
•Calculated Unbalanced Current through Neutral Line (In).
•512K Memory with Programmable Interval (Sampling time from 2 to 3000 seconds, 17,000 records for 3P4W system).
•Output of Waveform, Power Parameters and Harmonics at Command.
•Large Dot Matrix LCD Display with Backlight.
•Software to work with PC via Optical Isolated RS-232C to USB Interface.
•Built-in timer and calendar for data logging.
Conductor Size:
■ Model 6801(100A) 30mm(approx)
210mm(L)*62mm(W)*36mm(H)，200g(Weight)
■ Model 6802(1000A) 55mm(approx)，64*24mm(bus bar)
244mm(L)*97mm(W)*46mm(H)，600g(Weight)
■ Model 3007 (3000A) 24in/610mm(Probe Length)
130mm(L)*80mm(W)*43mm(H)，410g(Weight)
■ Model 3009 (1200A) 18in/460mm(Probe Length)
130mm(L)*80mm(W)*43mm(H)，390g(Weight)
■ Model 3006(6000A)
130mm(L) x 80mm(W) x 43mm(H)，430g(Weight)
- US$ 2475
- Log in for sale price
